свинцово-кислотный аккумулятор

The effect of carbon materials of two types was studied: multi-walled carbon nanotubes (“Art-nano” of the NSU “S” brand (TU BU 690654933.001.-2011)) and multilayer graphene (“Art-nano GT” (TU BU 691460594.004–2017), and modifications by treatment with ozone and dimethylformamide (manufacturer LLC Advanced Research and Technology, Belarus) on the structural characteristics, capacity and utilization of the active mass of the negative electrode of a lead-acid battery.

The influence of porous structure of the absorptive glass mats manufactured by «Hollingsworth&Vose» (thickness 2.8 mm) and BernardDumas» (thickness 3.0 mm), modified by impregnation with polymeric emulsions on the basis of polyvinylidene fluoride (KYNAR), polyvinylpyrrolidone copolymer with styrene (PVS) and polytetrafluoroethylene (Tf), on the efficiency of ionization of hydrogen in lead-acid battery mock-ups. The use of polymer modified emulsions separators from absorbtive glass mat allows to increase the ionization rate of hydrogen on lead-dioxide electrode.

Method and the resultsof measurementof the internalresistance ofbattery duringitschargeanddischarge are described.It was establishedthat the internal resistance ofthe batteryin operatingvoltage range is almost equallywhencharging and dischargingand does not dependon the current.

Lead-acid batteries exploitation possibility in pfrtial state of charge mode is demonstrated. Influence of this mode on chfracteristics of lead-acid batteries is studied.

Influence of the carbon additive in negative active material (NAM) on a resource of the lead-acid batteries working in a partial state of charge mode is studied. Extreme character of dependence of speed of degradation NAM from the maintenance in it of carbon is confirmed. Perceptivity of introduction of the carbon additive in negative electrodes of the lead-acid batteries working at partial state of charge mode is demonstrated.

Strategy of the accelerated mode of the charge, including constant current charge to 80 % state-of-charge and a pulse charge by asymmetric current to a full charge is offered. Results of the first investigation phase devoted to studying of influence of a mode constant current charge on a resource of lead-acid accumulators are presented in this work. Various influence of size of an initial charge current on degradation of positive and negative active materials and possibility of charge of the accumulator to 80 % state-of-charge for 0.5 h is demonstrated.

Electrochemical properties of Pb-Sn-Ca-Al-Ва alloys with the various content of barium are studied. It is established that the additive of barium reduces electrochemical activity of alloys at their cycling, and also reduces hydrogen and oxygen overvoltage.

Strategy of the accelerated mode of the charge of the lead-acid batteries, including constant current charge to 80% state-of-charge and a pulse charge to 100% is considered. Influence of key parameters of a pulse charge (amplitude and duration of charge pulse, duration of a pause, the general duration of a pulse charge) on the efficiency of a charge and a heat-up of batteries are studied in this work.

Strategy of the accelerated mode of the charge of the lead-acid batteries, including constant current charge to 80% state-of-charge and a pulse charge to 100% is considered. Various modes one – and two-stage constant current charges are studied in this work, and the estimation of influence of these modes on effectiveness ratio of a charge and a heat-up of batteries is yielded. The data, which allows reasonably choose the mode of the first stage of the accelerated charge to 80% state-of-charge, are presented.

Influence of a suspension of particles of the positive active material (PAM) in electrolyte on operation of the negative plate of the lead-acid battery is studied. The significant increase in speed of corrosion of a lead plate in case of contact of particles of PAM with its surface that can lead to appearance macro-defects on lugs of the negative plates is demonstrated.