English
РусскийThe binder influence on the performance of positive electrodes of lithium-sulfur batteries
The comparison of performance of positive electrodes of lithium-sulfur batteries made using the binders based on fluoroplastic (PVDF Solef 5310 and Kynar) and polyethylene oxide (PEO) was carried out. The electrodes made using PVDF Kynar or limited amounts of PEO were shown to have certain advantages. It was also found that electrodes with PEO had an increased specific capacity during the initial period of cycling, whereas electrodes with Kynar were characterized by the minimum capacity fading during cycling.
1. Yang Y., Zheng G., Cui Y. Nanostructured sulfur cathodes. Chem. Soc. Rev., 2013, vol. 42, pp. 3018–3032.
2. Song M.-K., Cairns E. J., Zhang Y. Lithium/sulfur batteries with high specific energy : Oldchallenges and new opportunities. Nanoscale, 2013, vol. 5, pp. 2186–2204.
3. Manthiram A., Fu Y., Chung S.-H., Zu C., Su Y.S. Rechargeable Lithium-Sulfur Batteries. Chem. Rev., 2014, vol. 114, pp. 11751–11787. https://doi.org/10.1021/cr500062v
4. Chen H., Ling M., Hencz L., Ling H. Y., Li G., Lin Z., Liu G., Zhang S. Exploring Chemical, Mechanical, and Electrical Functionalities of Binders for Advanced Energy-Storage Devices. Chem. Rev., 2018, vol. 118, pp. 8936–8982. https://doi.org/10.1021/acs.chemrev.8b00241
5. Yuan H., Huang J.-Q., Peng H.-J., Titirici M.M., Xiang R., Chen R., Liu Q., Zhang Q. A Review of Functional Binders in Lithium–Sulfur Batteries. Adv. Energy Mater., 2018, vol. 8, iss. 31, article no. 1802107. https://doi.org/10.1002/aenm.201802107
